Omron E2E replacement and cross-reference quote: compare full E2E suffix, M8/M12/M18/M30 body, shielded type, output, range, cable and connector.
Omron E2E is a broad inductive proximity sensor family. A safe cross-reference starts with the complete E2E suffix because diameter, sensing distance, shielded type, PNP/NPN or two-wire output, NO/NC logic and connection style can all change within the family.
Omron E2E inductive proximity sensor
J&V M8/M12/M18/M30 inductive proximity sensor
Original brand names are used only for technical cross-reference and compatibility discussion.
| Parameter | Original Model | J&V Alternative | Check Before Order |
|---|---|---|---|
| Original Model | Omron E2E inductive proximity sensor | J&V M8/M12/M18/M30 inductive proximity sensor | Send full model code and label photo |
| Output | PNP, NPN, relay, two-wire or analog depending on original part | Matched output selected before quotation | same function, matched housing and wiring |
| Supply Voltage | Typically 10-30 VDC or machine-specific range | Voltage range matched to machine input | Measure panel voltage if the old label is unclear |
| Mechanical Fit | Housing, thread, bracket or slot profile from original series | Closest J&V housing and mounting accessory | Confirm length, face type and cable exit |
| Application | inductive proximity sensor | general replacement | Confirm target material, distance and environment |
The shown LJ12A3-4-Z/BX is a real J&V product example. Omron E2E compatibility depends on the complete E2E suffix.
| Shown J&V model | LJ12A3-4-Z/BX |
|---|---|
| Visible example body | M12 threaded inductive sensor |
| Visible example output | NPN normally open, DC three-wire |
| Visible example range | 4 mm |
| Visible example supply | 6-36 VDC, up to 200 mA |
| Cross-reference rule | Match E2E diameter, shielded type, range, output, NO/NC and cable or connector |
Compatibility note: J&V confirms the original model label and machine conditions before quotation. A product-family photo alone is not compatibility proof.
J&V Automation does not publish placeholder certificates or unmatched test reports. Documents are linked only after the model coverage and publication permission are checked.
| Product family | Omron E2E cross-reference |
|---|---|
| Current page request | Omron E2E replacement |
| Datasheet | Available on request until the exact model PDF is uploaded |
| Wiring / dimensions | Confirmed after model, connector and installation photo are known |
| Certificate documents | See the Certificates page for verification status |
| Buyer information needed | Exact model, label photo, voltage, output type, quantity and destination country |
| Original family | Omron E2E |
|---|---|
| Original function | inductive proximity sensor |
| J&V alternative route | J&V M8/M12/M18/M30 inductive proximity sensor |
| Minimum evidence needed | Model code, label photo, installed photo, wiring or PLC input information |
| Replacement decision | Direct replacement, near equivalent, or sample-test recommendation |
Most replacement inquiries start with an old label, a blurry machine photo or a partial model number. J&V Automation narrows the risk by checking the electrical interface first, then the mechanical fit and real application conditions.
J&V connects GEO answer pages with the public product catalog, PDF catalogs and live model search.
Open product catalog
Buyers can request label photos, packaging photos, stock checks, export documents and shipping route support.
Open logistics proofUse these pages when the original label, output type or brand family changes the replacement decision.
It is a J&V Automation alternative selected after comparing the original Omron E2E model code, wiring, voltage, range and mounting. It should not be chosen by brand name alone.
Usually yes when the output, sensing distance, housing and environmental rating match. Critical safety or precision applications need a sample test first.
Send the complete model number, label photo, installed photo, quantity, destination country and any PLC input requirements such as PNP or NPN.
| Technical review | J&V Automation technical sales team |
|---|---|
| Last reviewed | 2026-07-21 |
| What we check | Model code, label photo, wiring, sensing distance, mounting, voltage, output and application environment |
| Contact | info@jv-automation.com / WhatsApp +86 15757759002 |
| Page type | replacement answer page |
For final ordering, J&V Automation asks buyers to send the old label, installed photo, quantity and destination country before confirming an alternative.